What is the difference between tumbler scres and ultrasonic vibro sifers

The ultrasonic vibro sifer is equipped with an ultrasonic system, which makes it and the vibro sifer higher in material screening accuracy and output than the ordinary vibro sifer, and also greatly reduces the blocking problem. When it comes to screening equipment, it is impossible to start, so I will introduce the difference between a tumbler scre and an ultrasonic vibro sifer.

1. Screening output

Due to the problem of motor power, if the ultrasonic vibro sifer chooses an excessively high-power motor, it is easy to damage the machine in the process of screening materials. In order to reduce the maintenance situation, the most common ultrasonic vibro sifer models on the market are generally below 1500mm, and the output is 25t/h.

The tumbler scre uses an ordinary motor, the running track is very soft, and the frame is basically not damaged. At present, the model of the tumbler scre ranges from 600mm to 2600mm, and the output can reach 50t/h.

In terms of screening output, the model and output range of the tumbler scre are larger, which can better meet the requirements of customers with large output and high demand.

2. Screening accuracy

Under the condition of maintaining effective screening, the tumbler scre can accurately screen 6 grades (5 layers of screen mesh), and the precision can be as fine as 800 mesh, while the ultrasonic vibro sifer has a maximum of 4 grades (3 layers of screen mesh), the most fine and general It is 600 mesh, and the general vibro sifer configuration screen is 300 mesh.

In terms of screening accuracy and classification requirements, for users who have higher and stricter requirements for accuracy and classification, it is recommended to choose a tumbler scre.

3. Screening method

The oscillating screen imitates the manual screening method, and combines the two actions of "screening" and "tumbling" to make the material perform circular motion and low-altitude jumping motion on the screen, increase the contact area of ​​the material during the screening process, and enable the material to Gentle and finer sieving;

The ultrasonic vibro sifer converts the electrical energy generated by the motor into mechanical energy and acts on the screen through the ultrasonic transducer, and the material on the screen surface is driven along with it to achieve rapid sieving.

If the material is relatively fragile and fragile particles, it is recommended that you choose a tumbler scre for screening.

4. Net cleaning device

The screening materials of the tumbler scre are very complex, such as irregular, viscous, electrostatic materials, etc. Therefore, different cleaning devices (silica gel, rubber balls, drum brushes) need to be selected according to the characteristics of the materials;

The ultrasonic vibro sifer uses the magnetic field and exciting force generated by ultrasonic waves to clean the mesh surface.