A Simple Guide To Ultrasonic Vibro Sifter Selection

Users who purchase ultrasonic vibro sifter for the first time may be confused, do not know how to choose the appropriate model and configuration, and do not know what to pay attention to. Today, I will introduce to you:

1. Determine the screening material

When purchasing an ultrasonic vibro sifter, you should choose it according to your own usage. The ultrasonic vibro sifter has a very obvious screening effect on fine powders, but for some materials with coarser particle sizes, it cannot achieve a better performance than ordinary rotary vibrating sieves or linear vibrating sieves. The obvious effect is not obvious for some materials with good fluidity and solid-liquid separation. The purchase of ultrasonic vibro sifter needs to be based on your own needs. The so-called only suitable for yourself is correct. Before choosing this series of sieves, you should clarify the particle size, physical properties and output requirements of the material, and then combine the different sizes provided by Zhentai Machinery. The processing capacity of the ultrasonic vibro sifter selects the size and quantity of the equipment;

2. Select the material

Since the ultrasonic vibro sifter is mostly used for the screening of fine materials below 600 mesh, the material requirements are also higher. For special materials to be screened, higher materials can also be used;

3. Removal of yield and screening accuracy

The diameter and effective screening area of ​​the ultrasonic vibro sifter screen affect the output and screening accuracy of the screen. Determine the screening accuracy (can be increased by more than 95%), so please make a reasonable selection according to your production requirements when purchasing;

4. Whether the quality is qualified

The main accessories of ultrasonic vibro sifter are: vibration motor, damping spring, seal, screen, ultrasonic system. Be sure to pay attention when purchasing, because the seals and screens used by some vibrating screens are unqualified, so after a period of use, the seals will be broken and the screen will be damaged. When purchasing, please choose the ones supplied by regular manufacturers. Accessories.

The above is the introduction of "A Simple Guide To Ultrasonic Vibro Sifter Selection", I hope it can help you in the selection process. If you have any questions, you can consult Dahan Machinery at any time.