Vibro Sifter for Chemical Raw Materials

Chemical raw materials are a relatively large category, mainly including powder particles, liquids and irregular particles. For materials of different properties, the selection of vibrating screens is also different. The following is the main introduction:

1. Powder and granular chemical raw materials

For this type of material, round vibro sifter or ultrasonic vibro sifter can be used due to different mesh numbers and properties. The number of materials screened by the rotary vibrating screen is chemical materials below 200 mesh, and the ultrasonic vibro sifter can screen fine powder materials below 500 mesh, so users should choose according to the nature of the material.

2. Liquid chemical raw materials

For liquid materials, it is mainly to screen out the impurities in it to improve product quality. For the screening of liquid materials, users can choose circular vibro sifter or high-frequency vibrating screen. Although these two types of equipment can screen and group slurry materials together, due to their different structure and capacity, the high-frequency vibrating screen will be higher than the circular vibro sifter in terms of output, but the accuracy will be lower accordingly. So please choose according to production requirements when choosing;

3. Irregular chemical raw materials

For irregular chemical materials, ordinary screening equipment can no longer achieve normal screening work, so Xiaobian recommends tumbler screen for you. This series of screening machine is a screening equipment that imitates manual screening action. It can effectively screen irregular materials by shaking the screen frame from left to right.

Since most of the chemical materials have certain corrosive properties, the sieving machine is made of 304 stainless steel, and the motor uses an explosion-proof motor. For more screening and filtration solutions, please contact Dahan Machinery.