Abrasive Linear Vibrating Screen

Introduction of Abrasive Linear Vibrating Screen

Abrasive linear vibrating screen grades the size and thickness of the abrasive through the mesh of the screen, which can be divided into one-layer, two-layer, three-layer, four-layer, five-layer, and six-layer types, which can be selected according to the specific needs of screening materials. Layer type linear vibrating screen, one layer of screen is mostly used to remove impurities and heavy filtration, and multi-layer screen can be used for particle size separation.

What is the Abrasive Linear Vibrating Screen used for?

For the manufacture of abrasive products, all raw materials, except for powdered talc and iron oxide, need to be crushed and screened. The screening particle size should be 4 to 900, that is, the diameter is about 6 mm (mm) to 6 microns (1 thousandth of a mm). one) or finer, divided into products of different specifications by abrasive linear vibrating screen.

How does the Abrasive Linear Vibrating Screen work?

The Abrasive linear vibrating screen uses dual vibration motors as the excitation source. When the two vibration motors are synchronized and rotated in directions, the excitation force generated by the eccentric block cancels each other in the direction parallel to the motor axis, and is perpendicular to the motor axis. The direction of the stack is a resultant force, so the motion trajectory of the screen machine is a straight line. The two motor shafts have an inclination angle relative to the screen surface. Under the reasonable action of the excitation force and the self-gravity of the refractory material, the secret chatter entering the equipment is thrown up on the screen surface, jumping forward and moving in a straight line, which is generated by the multi-layer screen. Several specifications of the sieve above and below the sieve are discharged from their respective discharge ports to achieve the purpose of screening and grading the abrasive.

Benefits of Abrasive Linear Vibrating Screen

1. It is suitable for the screening of any dry material of 0.074-15mm, and the maximum feeding particle size is preferably not more than 20mm.

2. It can be used in single layer or multi-layer, up to seven layers. The screen frame is generally made of wood. If the screen hole is large and the output is high, the screen frame can be made of steel structure.

3. Motor installation methods can be divided into lower vibration type and side vibration type, and shock absorber installation methods can be divided into seat type and hanging type. Special designs can also be made according to user needs.

4. Fully enclosed structure, good sealing, reduce dust pollution.

Related Videos

What are the specifications of Abrasive Linear Vibrating Screen?

Model	Layer	Screening Area (mm)	Mesh Size (mesh)	Particle Size (mm)	Capacity (t/h)	Power (kw)	Vibration Direction Angle (°)	Screen Inclination (°)	Dual Amplitude
DZSF-520	1-6 layers	500*2000	2-400	0.074-10	≤3	0.37×2	45-60	0-7	3-4.5
DZSF-525		500*2500			≤5	0.37×2
DZSF-612		600*1200			≤8	0.37×2
DZSF-1020		1000*2000			≤12	0.75×2
DZSF-1025		1000*2500			≤16	0.75×2
DZSF-1030		1000*3000			≤20	1.1×2
DZSF-1224		1200*2400			≤23	1.5×2
DZSF-1525		1500*2500			≤28	1.5×2
DZSF-1530		1500*3000			≤32	2.2×2