The difference between high -frequency vibration sieve and ordinary vibration screen

1. High-frequency vibration sieve is suitable for processing materials with large viscosity and less impurities; ordinary vibration sieve is suitable for handling dry powder particles and thin liquids, which are easy to filter or remove.

The motor speed of high -frequency vibration sieve is high, 3000 rpm per minute, which can quickly break the surface tension of viscous pulp and quickly cross the net; the vibration frequency of ordinary vibration sieve is relatively low, and the type suitable for screening is viscous. Materials with low degree and more impurities are easy to produce.

2. Due to high -frequency vibration, high -frequency vibration sieve is not easy to block even if it is treated with viscous liquid.

The frequency of high -frequency screening is increased from the original 1440R/min to 3000r/min. Therefore, the vibration frequency is high and it is not easy to block the screen. The motor used in ordinary vibration screening is a level 4 vertical vibration motor. The motor speed is only 1500R/min.

3. High -frequency vibration sieve is only used for filtering, except for miscellaneous use, and ordinary vibration sieve can also be used in addition to being anticardial.

The high -frequency vibration screen is mainly for the dedicated screening equipment produced by thick pulp filtration. Therefore, in order to ensure the efficient filtering and screening of the slurry, it is only a single -layer design. Therefore, high -frequency screens can only be filtered and removed.

Ordinary vibration sieve is a general screening equipment. The number of screen layers can be customized by the number of layers of 1-5 layers according to the customer's screening purposes. In addition to a single-layer processable filtering Granules perform granular grading of 2-6 levels.