High -frequency vibration sieve for latex paint filter -get rid of the net

Latex paint is a common decoration coating that is based on synthetic resin emulsion, and then mats with pigments, fillers, various additives, etc. The coatings scattered in the water together can give a protective film on the wall like a mobile phone film.

Latex paint needs to be filtered whether it is before packaging or before use. Due to the characteristics of stubbornness and viscosity, latex paint requires special screening equipment, so high -frequency vibration screens with a level 2 motor can play a role.

The production of latex paint requires a variety of powders such as pigmentation, fillers, auxiliary agents and other powder. Although it has been crushed before the pigment aid is added, there will be some small particles that are not delicate enough, causing synthetic latex paint knots Block group. Therefore, filtering before packaging can effectively remove the closing of the closing block and ensure the quality of the latex paint.

In addition, due to the large viscosity of latex paint and heavy paint body, in order to avoid the paint liquid too thick, it is necessary to dilute between 5%-15%before applying the color depth of the latex paint, and then use it after filtering.

Advantages of high -frequency vibration sieved filter latex paint:

1. 3000 rpm/cents of level 2 motors, strong vibration frequency, and the problem of getting rid of the latex paint of the latex paint;

2. Fine to 500 -mesh screen network, which can meet the fineness requirements of common latex paint;

3. Add a sieve cover to a sieve cover and the inlet of the inlet flange connection ring, and directly connect to the upper end feeding equipment;

4. Two outlets, automatically discharge impurities and latex paint for facilitation;

5. Waterproof motor can be rinsed directly with water after use, safe and easy to operate.