Detailed product introduction of slap-type standard vibrating sieve machine

The slap-type standard vibrating sieve is referred to as the slap sieve. It is mainly used in the laboratories of universities/research institutes/enterprises, and is used with standard test sieves for particle size analysis and detection of granules and powder materials. 0-99 minutes automatic timing device, can realize timing shutdown, fully automatic sieveing.

The slap-type standard vibrating sieve machine can be equipped with special fixtures to clamp ф200 standard sieves, ф75, ф100 sets of sieves. The height of the slap-rod fixed sieve frame can be adjusted, and 2-7 layers of tests with different mesh numbers can be added. sieve.

Compared with the experimental sieve, the slap-type standard vibrating sieve machine increases the slap-type longitudinal movement, which can sieve to obtain more undersize (fine material).

Slap-type standard vibrating sieve machine has two modes of belt drive and gear drive (belt-type slap sieve and gear-type slap sieve). The belt-type slap sieve is designed on the basis of the gear-type slap sieve.

Relatively speaking, the belt slap type standard vibrating sieve has a more compact structure, and the rotating part adopts standard bearings, which is not easy to wear and is easy to replace. If it is worn, only the belt needs to be replaced;

The gear-type slap sieve needs to be oiled for the first time, and once it fails, the line needs to be returned to the factory for maintenance, which is expensive.

Therefore, the standard vibrating sieve of belt slapping type is better than gear type slapping sieve.