Z-type bucket elevator lifting skills

Z-type elevator is also called Z-type dumping bucket elevator. Z-type dumping bucket elevator is a new type of material conveying equipment that has been successfully developed by integrating advanced technology in the industry. Since the Z-type elevator was put on the market, it can quickly adapt to the needs of production, and many sets of products have been successfully used in environmental engineering machinery, metallurgy, chemical industry, fertilizer and other industries. Z-type bucket elevator can be widely used in various environments that require gentle processing. It is a kind of material lifting equipment that is deeply loved by customers. The following editor will give you an analysis on how to use Z-type bucket elevator with high efficiency.

Standard discharge height: 3200m bucket elevator

Standard feed length: 863mm

Standard discharge length: 1930mm

Variable speed control: as required

Frame Material: Stainless Steel/Painted Steel

Bucket options: 1L, 1.8L, 3.8L and 6.5L

Model: Z type, C type, multiple discharge ports

Control System

1. Use the feeder to feed the Z-type elevator. As we all know, the feeder is a feeding device used for conveying products such as pellets, powders, flakes, and tapes. It is widely used in various industries. In today's society, more and more manufacturers use mechanized transportation. This method will inevitably replace human labor. It has high accuracy, saves time and labor, and greatly reduces labor intensity, labor costs and human resources. Combining the feeder with the Z-type elevator can well feed the material at a uniform speed, thereby improving the efficiency of the Z-type elevator.

Second, enhance the training of operators. First of all, strengthening the training of employees can reduce the occurrence of accidents. According to statistics, some employees are unfamiliar with the operation of the z-type elevator because they have not experienced training, which will increase the failure rate of the equipment. Once the equipment is stopped, the production efficiency of the factory will decline. . In addition, losses can be reduced. The loss mainly comes from the lack of serious operation and low skills of employees. Through training, employees will recognize the corporate culture, work hard, and at the same time improve the technical level, reduce losses, and standardize the operation of employees, which can increase the production volume of the factory at the same time, thereby improving efficiency.

3. Do a good job in the maintenance of the Z-type hoist. We all say that "equipment maintenance is eight points, and equipment maintenance is two points." Well-maintained equipment can reduce the number of equipment maintenance, thereby reducing production costs, predicting the risks of equipment in advance, and repairing and maintaining it to the greatest extent. Improve the quality of the product and provide a good working process for the material. Secondly, it is necessary to develop a good habit of daily cleaning equipment. After all, more than one person is working in the production workshop most of the time, and it is not running every minute and every second. Employees can use the plate loading, downtime and leisure time to divide the labor to wipe and clean.

Fourth, the maintenance of the power source. Some users put the Z-type elevator in a relatively dry environment, the surface of the motor should be kept clean, and the air inlet should not be obstructed by dust, fibers, etc. When the thermal protection of the motor operates continuously, it should be determined whether the fault comes from the motor or the overload or the setting value of the protection device is too low. After the fault is eliminated, it can be put into operation. It should be ensured that the motor is well lubricated during operation. Generally, the motor needs to be maintained after running for a certain period of time. The reducer needs to replenish and replace the lubricating oil regularly to avoid the loss of the lubricating oil and the damage to the power source. Often many users break down the equipment without maintaining the power source, so the equipment is discontinued.