Working Principle of Vibratory Sifter

The vibratory sifter is suitable for dry-to-wet screening and classification of powder, granular, fibrous materials or slurry. It is a new type of high-precision fine-grain screening equipment. Its working principle is as follows:

Working and principle of vibratory sifter

The working principle of the vibratory sifter is to use the operation of the motor and the constant change direction to control the screen surface to change the direction constantly, so that the direction of movement in the sieve selection machine of the raw material of the table makes the powdery materials separated, and the impurities are removed. The process of the next round of material separation movement is carried out. Of course, there is also a special place in the screening machine is the heavy hammer installed at the upper and lower ends of the motor shaft, also called uneven weight. The change of the motor direction is caused by the change of its position, which is the most important part of the operation of the screen selection machine. The working principle of the screening machine is very simple, and the working process is also very simple. At present, the screening machines on the market have basically used electric equipment, which is convenient to operate and easy to use. In addition, the screening machine also has the characteristics of exquisite machine design, high work efficiency, and easy to change the screen, which only takes five minutes. Moreover, the screening machine allows the use of a variety of screens, such as nylon, special dragon, and PP mesh, and can also screen a variety of materials.

The vibratory sifter is suitable for any industry of powder, granule, liquid screening and filtration. If you have material screening, filtration, grading and other needs, you can contact us at any time.