Your location is: Home > News Center > What Is Auger Conveyor Used For?

What Is Auger Conveyor Used For?

As a commonly used conveying equipment, auger conveyor can complete centralized conveying, separate conveying, mixing, mixing, dehydration, customized batching, unloading, stacking, and is used in conjunction with other conveying equipment. Compared with other conveyors, it has a simple structure, It has the advantages of good sealing, multi-point loading and unloading, safe and convenient operation, and low cost. This article will introduce you to the auger conveyor in detail.

What is the purpose of auger conveyor?

Auger conveyors are divided into two types: shafted and shaftless. Shafted auger conveyor is suitable for non-viscous dry powder materials and small granular materials (such as: cement, fly ash, lime, grain, etc.), shaftless auger conveyor is suitable for conveying viscous and viscous materials, and will not stick to the shaft due to the material. The use of fully enclosed conveying and easy-to-clean spiral surfaces can ensure environmental hygiene and ensure that the delivered materials are not contaminated and leak-free.

How does an auger conveyor work?

After the product is conveyed to the auger conveyor shell through the feeding port, it is subjected to centrifugal force and frictional force of the pipe wall in the inner spiral groove. It rotates with the spiral blade and slides down the spiral groove under the action of gravity, so that the material is continuously advanced and conveyed. , and finally evenly discharged from the discharge port.

Features of auger conveyor

Large conveying capacity: It allows to transport a large amount of materials in a small space, with a conveying capacity of 458m³/h and a length of up to 60 meters.

Uniform conveying and no material jamming: the whole machine is fast, the conveying is fast and uniform, the material is not easy to be blocked, and it can be connected and fixed with other supporting equipment.

Sealed Construction: Prevents odors, prevents ingress of foreign objects, avoids spills and minimizes maintenance.

Easy to load and unload: The horizontal auger conveyor can be loaded and unloaded at any point on its conveying line, and the vertical auger conveyor has superior feeding capacity compared with the screw feeding device.

Flexible layout: It can be erected on the elevated, ground or pit, can be installed horizontally or on a slope (≤15°), or can be transported vertically upwards.

Auger conveyor model and parameters

Model Diameter
(mm)
Pitch
(mm)
Rotating speed
(r/min)
Capacity
(m³/h)
Rotating speed
(r/min)
Capacity
(m³/h)
Rotating speed
(r/min)
Capacity
(m³/h)
Rotating speed
(r/min)
Capacity
(m³/h)
Small 100 100 100 140 2.2 112 1.7 90 1.4 71 1.1
125 125 125 125 3.8 100 3 80 2.4 63 1.9
160 160 160 112 7.1 90 5.7 71 4.5 56 3.6
200 200 200 100 12.4 80 9.9 63 7.8 50 6.2
Small 250 250 250 90 21.8 71 17.2 56 13.6 45 10.9
315 315 315 80 38.8 63 30.5 50 24.2 40 13.4
400 400 355 71 62.5 56 49.3 45 38.6 36 31.7
Large 500 500 400 63 97.7 50 77.6 40 62 32 49.6
630 630 450 50 138.5 40 110.8 32 88.6 25 69.3
800 800 500 40 198.5 32 158.8 25 124.1 20 99.3

In addition to the above parameters, if there are other requirements for the auger conveyor, such as: the machine needs 304 stainless steel, or a universal wheel, a discharge port feeding pipe at the bottom, an anti-blocking switch or other special designs, etc., please contact us.

The above is the introduction of auger conveyor, the product specifications are (tube type, U type) (single shaft, no shaft), shell blade material: carbon steel, stainless steel, according to the particle size, conveying volume and conveying distance of the conveyed material, reasonable selection And design, so that no blockage, no arch, smooth discharge.

Sunday October-09 2022  17:35:36
Resources
Contact Us

Whatsapp:+86 15236742901

Email:sale@xxdahan.com

Address:China,Yanjin county forest park gate to the west 1000 meters north road.