What Is A Climbing Belt Conveyor?

In order to prevent the material from tilting back during transportation, a climbing belt conveyor is usually used, and a baffle is added to the conveyor belt, which can effectively prevent the material from sliding backward. Then the editor will simply tell you about the knowledge of the climbing belt conveyor.

Application of climbing belt conveyor

The climbing angle of the climbing belt conveyor can be greater than 30 degrees, and the vertical conveying can even reach 90 degrees, which is suitable for continuous transportation of goods between floors or high places.

Features of Climbing Belt Conveyor

1. It can transport bulk materials at a large inclination angle, which can save a lot of equipment area and completely solve the conveying angle that cannot be achieved by ordinary belt conveyors. It can be conveyed within the range of 30 degrees to 90 degrees.

2. The conveying capacity is large, up to 6000m³/h, and the vertical lifting height can reach 203m. When the material is conveyed vertically, the particle size of the material can reach 400mm.

3. It can realize one or more feeding control, which can be easily connected with various feeding equipments.

4. The conveyor belt with corrugated rib and clapboard can prevent the material from slipping when conveying at a large angle.

The layout of the climbing belt conveyor

The climbing belt conveyor consists of an upper horizontal section, an inclined section and a lower horizontal section.

1. Lower horizontal section: low-profile intermediate frame legs are used for smooth loading during loading, reducing the pressure on the conveyor during loading and reducing material scattering.

2. Inclined section: The horizontal section adopts low, medium and high intermediate frame legs, and the inclined section adopts low intermediate frame legs. When the inclination of the conveyor is greater than 45°, it is recommended to use type II low-profile intermediate frame legs.

3. Upper horizontal section: it is the discharge end. According to the discharge requirements of different heights, the height of the head frame used is different, and the legs of the intermediate frame need to be matched according to the head frame.

Site picture of climbing belt conveyor

The above is the introduction of the climbing belt conveyor. The climbing belt conveyor can be combined with various production lines to form a complete logistics conveyor line.