What Is The Maximum Climbing Angle of Climbing Belt Conveyor?

The climbing belt conveyor is suitable for large-angle or vertical conveying of bulk materials, so what is its climbing angle? Just briefly tell you about the angle of the climbing belt conveyor.

The climbing angle of the climbing belt conveyor

The common types of climbing belt conveyors are 30 degrees and 45 degrees. If the angle is larger, the belt conveyor will be difficult to convey because the angle is too large. At this time, it is necessary to choose a belt with friction to make a climbing belt conveyor. When driving, it is usually necessary to choose a belt with a partition or add a corrugated edge to the side of the belt to prevent objects from falling during the climbing process.

The following shows you the display pictures of different angles of the climbing belt conveyor:

Suggest

Climbing leather conveyors are used above 30 degrees because the overall structure of these machines and the belts used are different from ordinary belt conveyors. Corrugated ribs and partitions are added in the middle to form each individual lattice, and the cost is relatively high. And the conveying angle is lower than 30 degrees, it is recommended to use ordinary belt conveyor, the price will be cheaper, of course, it depends on the actual situation of the site.