Vibro Sifter for Sieving Silicon Carbide

Everyone knows that silicon carbide is corrosive. Therefore, when sieving chemical raw material silicon carbide, the use of ordinary carbon steel or stainless steel may corrode it and affect the quality of silicon carbide. So when sieving silicon carbide, which vibro sifter can we choose? Below, Dahan Machinery will share with you a vibro sifter suitable for silicon carbide screening.　　

Dahan Machinery recommends you according to the material characteristics of silicon carbide-plastic material anti-corrosion vibro sifter

The plastic anti-corrosion vibro sifter uses a vertical vibration motor as the vibration source like ordinary vibro sifter. The screen and the contact parts with silicon carbide are made of plastic material. After the silicon carbide is poured into the screen, it is subjected to the excitation force of the motor. According to the difference in the size of each material between the screen mesh and silicon carbide, the silicon carbide smaller than the mesh size quickly enters the lower layer, and the impurities in the silicon carbide larger than the screen mesh are left on the screen surface and discharged at the upper discharge port. , And then complete the entire silicon carbide screening process.

The plastic anticorrosive vibro sifter produced by Dahan Machinery Factory is mainly for the screening of highly corrosive materials. The screening equipment has the following functions:

Impurity removal: remove impurities in materials. This type of screening machine generally has one layer, the upper layer is impurities, and the lower layer is the finished material.

Classification: Some materials need to be classified into multiple types, so in general, a multi-layer screening machine with a height of 3 layers is required.

The above is the brief introduction of Dahan Machinery on the anti-corrosion vibro sifter of silicon carbide plastic.