Vibro Sifter for Sieving Nut Powder

Nut powder has a variety of nuts that are matched together after being milled to make children's food, meal replacement powder and other nutrients. It is convenient to carry and has a balanced nutrition. It can replace breakfast and increase children's nutrition. The nut flour industry has also risen as a result. Food safety has strict requirements for food processing, storage, sales and other processes and related equipment and materials to ensure food hygiene and food safety, and comply with national mandatory standards and requirements.

Everyone knows that nuts contain oil, especially after powdering, the oil will make the nut powder agglomerate, and the use of ordinary food vibro sifter will cause blockage. The Dahan manufacturer can find through the test machine, although 1mm is equivalent to 18 mesh size comparison However, the screen is still blocked. The upgraded ultrasonic vibro sifter is used for screening, which is equivalent to increasing the vibration frequency of the ordinary vibro sifter by 3 times. Even if the nuts are clumped and blocked by large grease, they will easily pass through the screen. .

The ultrasonic vibro sifter is an upgraded version of the ordinary vibro sifter. Its appearance is the same. The difference is that the ultrasonic vibro sifter adopts a special grid and adds an ultrasonic transducer and a power control box. The screening power comes from the power conversion capability of the ultrasonic vibrating screen system. The electric energy is converted into high frequency electric energy of 18KHz, input into the ultrasonic transducer, a low-amplitude, high-frequency ultrasonic vibration wave (mechanical wave) is introduced on the screen, and a high-frequency low-amplitude ultrasonic vibration wave is superimposed on the screen, ultra-fine powder The body receives huge ultrasonic acceleration, so that the material on the screen surface is always kept in a suspended state, thereby inhibiting the blocking factors such as adhesion, friction, flat drop, and wedging.

In this article, we mentioned that food safety also has requirements and specifications for food processing equipment. Therefore, the ultrasonic vibro sifter should be made of stainless steel, and at least the part in contact with the material should be made of stainless steel.