How To Choose Multi-layer Vibro Sifter

Multi-layer vibro sifter is recognized as a high-efficiency and high-yield screening equipment, so it is widely used by users. As a result, users will have a lot of doubts when choosing a multi-layer vibro sifter. Today, let's discuss together how we should choose the multi-layer vibro sifter?

1. The number of layers is different

(1) For materials, the use of single-layer vibro sifter is for the screening of one material, and the multi-layer vibro sifter can screen multiple materials or a single material with multiple precisions.

(2) The processing capacity. The processing capacity of the vibro sifter is determined by the diameter of the screen surface. Due to the stability and safety of the equipment, the diameter of a single layer will be higher than that of the multi-layer vibro sifter, so the output will be higher than that of the multi-layer equipment. So if it is a kind of material, and it is a large-scale production, you can consider a single-layer vibro sifter.

2. Determine the materials to be screened

(1) The nature of the material is different, so the multi-layer vibro sifter to be selected will be very different. For example, some materials are corrosive, we have to choose multi-layer vibro sifter made of stainless steel. For example, in some food industry and pharmaceutical industry, the sanitary requirements for vibro sifter will be very strict, and it will also need multi-layer vibro sifter made of stainless steel.

(2) After the materials are determined, each material will have the fineness of screening. It is necessary to choose the screen according to the different types of multi-layer vibro sifter. The aperture of the screen is different, and the fineness of the material to be screened is also different. For example, the sieve required for sieving the grain or powder of millet will be different.

3. Output

(1) When the production capacity is low, the output will be relatively low. The multi-layer vibro sifter frame can choose the wooden frame. When the production capacity is high, the output will be relatively high, so you need to choose a steel frame.

(2) If the output is low, you can consider choosing a small model of multi-layer vibro sifter. If the output is high, you need to choose a large model of multi-layer vibro sifter.

(3) The motor power also needs to choose a suitable model according to the output of the multilayer vibro sifter.

4. Workplace

(1) Sometimes the height of the discharge port of the multi-layer vibro sifter is also limited, and the height of the site is also limited. At this time, the vibration motor of the multi-layer vibro sifter can be placed in other parts of the multi-layer vibro sifter according to the actual situation.

(2) The design of the discharge port of the multi-layer linear vibrating screen is highly variable, all in order to meet the needs of the production line. For example, the shape of the discharge port of the multi-layer linear vibrating screen can be round or square; the direction of expansion and contraction of the discharge port can be designed to extend forward, extend downward, extend obliquely downward, and so on.

To select a suitable multi-layer vibro sifter, there are not only these factors to consider, there are also many areas that need to be considered. Choosing a suitable multi-layer vibro sifter can not only improve the screening efficiency of materials, but also greatly save time and cost.