How do you clean a stainless steel mesh strainer?

Stainless Steel Sieve Filter is a common filter, which can effectively filter impurities in water, air, liquid and other substances, and maintain the purity of substances. Although the stainless steel mesh filter is convenient to use, it will accumulate a certain amount of dirt and debris during long-term use, which will cause its filtering effect to decline. Therefore, it is very important to clean the stainless steel mesh filter regularly. How to clean the stainless steel mesh filter will be described below.

1. First remove the filter, wash it with clean water or blow out the stainless steel mesh filter with a rubber tube, and rinse all parts thoroughly until the water flow is clear.

2. Soak the stainless steel mesh filter in the cleaning solution. The cleaning solution can be a high-efficiency detergent or other cleaning agent. In the process of soaking the filter, please be careful not to let water enter the back parts, so as not to affect the service life of the filter. Soak the filter for about 10 minutes to allow the solution to fully break down debris and dirt in the filter.

3. Use a brush to clean the inside and outside of the stainless steel mesh filter. For more stubborn dirt, it can be gently scrubbed with a fine brush. Do not use metal products to clean the stainless steel mesh filter, so as not to scratch the stainless steel mesh and affect the service life. When brushing the filter, please pay attention to starting from the outside and gradually brushing inward.

4. Rinse off the cleaner. Soak the stainless steel mesh filter in clean water and rinse thoroughly to remove all cleaning agents, residue, etc. You can also dry the inside of the filter with compressed air before putting it back in place.

5. The way to greatly reduce the cleaning frequency of the stainless steel mesh filter is to disassemble and clean the filter after using it for a certain period of time each time, so that the turbid matter in the filter can be removed very well, and the filtering effect can be kept stable for a long time.

Precautions

Avoid using cleaners containing acidic ingredients to avoid damaging the stainless steel surface.

Wear rubber gloves during cleaning to protect your hands from chemicals and dirt.

If you encounter stubborn dirt, you can use a special stainless steel cleaner for cleaning, but be sure to follow the product instructions.

In short, keeping the stainless steel mesh filter clean can improve its filtration efficiency and service life. The importance of this task cannot be underestimated, given that it is intended to perform its role repeatedly.