When the vibrating screen is working, what is the amount of material on the screen?

Generally, the thickness of the material on the screen surface is required to be no more than 2 cm when the rotary vibrating screen assembly line is working.

reason:

In terms of structure: the height difference between the screen mesh surface of the rotary vibrating screen and the discharge port is about 2 cm. If it is higher than two cm, some materials will be discharged directly from the discharge port without screening, which will affect the screening accuracy.

In terms of output: too thick sieve material will cause the screening accuracy to fail, and too thin sieve material will greatly reduce the screening output and fail to meet the production requirements, so it is necessary to control the feeding amount.

solution:

1. The screw feeder connected to the vibrating screen is designed to be adjustable in speed, which is convenient for users to adjust the feeding speed according to the thickness of the material on the screen during use and combined with their own production requirements;

2. A gate design can be added to the rotary vibrating screen. The gate type rotary vibrating screen can control the screening time according to the feeding amount. When the feeding amount is large, the screening time of the material screen surface can be extended by closing the gate of the rotary vibrating screen, improving the efficiency of the screening process. Screening accuracy.