Vibratory Separator for Powdered Sugar

Powdered sugar is a kind of pure white powder sugar with very fine particles, so what type of vibratory separator is used for this ultrafine particle material? When choosing the model of vibratory separator, we need to be clear about the characteristics of the material. The specific gravity of powdered sugar is between 0.5-0.8, and the mesh number is about 100. Fine screening equipment is needed to achieve the screening effect.

1. Firstly, the powdered sugar raw material is fed into the screen surface at a constant speed through the feeding port of the vibratory separator. The upper and lower ends of the motor of the vibrating screen are equipped with eccentric weights, which convert the movement of the motor into three times of horizontal, vertical and inclined. This motion is transmitted to the sieve again, so that the powdered sugar on the sieve also performs a three-dimensional motion and keeps beating;

2. Then, due to this non-stop movement, the powdered sugar particles smaller than the mesh diameter pass through the sieve hole and become the undersieve, while the large particles that cannot pass through the sieve hole continue to jump on the sieve surface and reach the discharge port. Discharged to complete the screening process.

3. Due to the fully automatic operation of this equipment and the force of the vibrating motor, the precision of powdered sugar screening is high and the processing capacity is also large. The vibratory separator of the DH-800 model can process 200KG powdered sugar per hour. It is more than enough for a small production line.

4. In addition, the vibratory separator can also be equipped with cleaning devices such as bouncing balls, so there is no need to worry about problems such as mesh clogging and low penetration rate, and the material is made of stainless steel, which greatly avoids the sugar powder in the process of sieving. The material is polluted due to poor material. '

Sieving powdered sugar has high precision and high efficiency. For more information about vibratory separator, please contact Dahan Machinery Consulting.