Vehicle Flexible Grain Auger for Grain Loading

Vehicle flexible grain auger is a pneumatic and motor-driven bulk grain conveyor for truck loading and grain lifting. This article will explain the vehicle flexible grain auger in detail.

Application of vehicle flexible grain auger

Vehicle flexible grain auger can be installed on the carriage, equipped with grain suction, grain cleaning, and conveying devices, which can be bent, moved, and easy to carry. Loading and unloading trucks, clearing warehouse bottoms, etc., the vehicle flexible grain auger is small and flexible, and the loading and unloading is fast and convenient.

Vehicle flexible grain auger working priciple

Flexible grain auger is generally mainly composed of feed port, Oxford tube, shaftless screw, discharge port, machine base, motor (gasoline diesel engine, worm gear reducer) and other parts. When the material enters the Oxford tube evenly and appropriately from the feeding port, the motor (gasoline and diesel engine) drives the screw to rotate through the pulley, and the screw conveys the material to the discharge port at one end of the chassis, and then falls into the carriage, warehouse, nylon bag and other materials to receive place. The efficiency can reach 25 tons per hour, and the lifting height is 8 meters. When the horizontal distance is 6-30 meters, the bending radius of the hose shall not be less than one meter.

Features of vehicle flexible grain auger

1. One machine is multi-purpose, can absorb grain, and can also be used for non-corrosive granular materials such as granular fertilizer, feed, chemical products, etc., and can receive 6-8 tons of grain in one hour.

2. The vertical height can reach 4 meters, and the horizontal transportation distance is 5-30 meters. Fully meet the general application needs.

3. The breakage rate is low, the breakage rate is less than 0.2%, which reduces the damage to grains and grains.

4. The whole machine is light in weight, occupies a small area, and is easy to move and install.

Technical parameters of vehicle flexible grain auger

The machine can use 3kw two-phase/3KW three-phase copper wire motor below 7m, and 4kw three-phase electric copper wire motor can be used between 8m-12m. Under normal circumstances, the vertical height of 220V is 3 meters, and the vertical height of 380V is 4 meters (the data is generally in food subject)

The following shows the live pictures of the vehicle flexible grain auger during loading and grain harvesting:

The vehicle flexible grain auger is used for loading and unloading, unloading, overturning, stacking, as well as bulk and bulk transportation in farms, docks, stations, large grain depots, etc. Single, multiple combinations, or combined with other equipment to form a conveying system to meet different operating requirements