Ultrasonic Vibrating Screen for Powder Paint

Ultrasonic vibrating screen for powder coating is mainly used to remove ultra-fine powder in finished coating materials. Manufacturers generally use 300 mesh and 325 mesh national standard screens for screening. This screening process is relatively critical and strict. In the process, ultrasonic vibrating screen is usually used for screening.

There are two key points in this screening process: (1) The material on the screen passes through a conical return tray before reaching the working screen of this layer. This kind of sieving form greatly improves the sieving rate. ②Due to the heating of the ultrasonic device, the paint will melt, and the agglomeration will fall into the finished material during the cooling period after melting, causing secondary pollution to the material. In response to this situation, our company has developed ultrasonic external equipment, which effectively solved the problem. Melt agglomeration problem in paint screening.

The ultrasonic vibrating screen is equipped with an ultrasonic anti-blinding system, which can avoid the problem of screen blockage, the accuracy of screening treatment can be increased by 1-70%, and the output can be increased by 1-10 times.