Electric flour sifter is used for flour safety sifting, process sifting, inspection sifting, mainly used for pre-pack sifting, can be installed in artisanal bakeries or large industrial flour mills to ensure the safety of flour by eliminating clumping and contamination , hygiene and quality.
After the wheat is ground, it needs to be screened with an electric flour sifter. The main reason is that in order to improve the flour extraction rate in the flour milling process, the endosperm on the cortex must be scraped off as much as possible, and in the second process, part of the aleurone layer will be scraped off and mixed into the flour. In the process of scraping and peeling, a small amount of wheat husks will also be broken into fine powder, which needs to be sifted into flour to improve the uniformity of flour particles. In this production process, it is necessary to sieve it with a flour sieve to improve the fineness of the flour. In addition, the cleaning of wheat is the basic work of milling. Only when the pure wheat is sent to the milling workshop for processing, can high-precision flour be produced. It is necessary to use an electric flour sifter to clean up various impurities contained in the wheat, so as to reduce the impact of impurities on the fineness of the flour.
It can be used in the front-end feeding system of flour, instant noodles, dried noodles, food and other production lines to separate foreign matter in flour.), it can replace manual observation and sorting of foreign matter, with high efficiency, and can be installed under bulk silos or in various scales Bakery and food processing plants.
1. It can be used to safely remove pollutants and agglomerates in flour, and ensure the high quality of products by eliminating potential pollutants. It can be installed in bakeries or food processing plants of all sizes.
2. The inlet and outlet are designed in the same vertical direction, and the finished products under the sieve pass through the screen quickly, and the processing capacity is 2-5 times that of ordinary sieves.
3. The part in contact with the material is made of 304 stainless steel, without dead corners, easy to clean and disinfect, ensuring hygiene and safety.
4. Fully enclosed structure, avoid flying powder, eliminate dust problems in the air, and no pollution from manual interaction.
5. The machine can be quickly disassembled without any tools, easy to clean, and can avoid pollution to the screening materials.
Address:China,Yanjin county forest park gate to the west 1000 meters north road.
Online Chat 
Email