Screening equipment for rice

As one of the staple foods, rice needs to use screening equipment to screen and remove impurities in rice during processing to ensure that the clam shells in the grain can be removed. Which equipment can be used to screen rice? The following is the relevant introduction.

Rice screening not only pays attention to precision, but also pays attention to its production requirements. For the needs of these two aspects, Dahan manufacturers recommend the following two kinds of rice screening equipment.

Precision requirements - vibro sifter

The vibro sifter can be sieved to the finest 500 mesh or 0.028mm, the filtration can be as small as 5 microns, and the 1 to 5 layer screen can be sorted and screened. It can be sorted or filtered at the same time for 2 to 6 grades. High-precision screening, vibro sifter is a fully enclosed structure, the powder does not fly, the liquid does not leak, the mesh is not blocked, the automatic discharge is good, and the screening effect is good. 

Production requirements - linear vibrating screen

The vibrating screen has a maximum meshing number of 400 mesh and is suitable for screening of various dry powdery or granular materials with a particle size of 0.074-5mm and a water content of less than 7%. The maximum feed size is not more than 10mm. The number of sieve surface layers is 1~5 layers, which can carry out 2 to 6 grades of screening and impurity removal at the same time. It is suitable for 24-hour assembly line operation, the processing volume is 0.12-20t/h, which is more difficult for fine screening and impurity removal of rice. The advantages. Xinxiang Dahan linear vibrating screen has a variety of materials, such as: carbon steel material, all stainless steel material, etc., to meet the screening needs of different materials.

 If you are willing to buy rice screening equipment or have any problems, please feel free to contact us.