As a common conveyor equipment, the belt conveyor reflects the noise of the belt conveyor during operation, and asks how we should solve it. Therefore, I am here to introduce this issue.
As the saying goes, "A key opens a lock", in order to more effectively solve the problem of noise on the belt conveyor, the first thing is to start from the ground up, find out the cause, and then prescribe the right medicine to quickly know the solution.
The belt conveyor roller is eccentric, mainly for one reason: 1 the uneven thickness of the seamless steel pipe of the idler causes the centrifugal force generated by it to be large; 2 the center of the bearing hole at both ends has a large deviation from the center of the outer circle, and the centrifugal force is too large.
Solution: Continue to use if the bearing is not damaged and the noise is not very high.
Abnormal noise at the coupling between the high-speed end motor of the drive unit and the reducer or the coupling with the brake wheel. This noise is also accompanied by the same vibration as the motor rotation frequency. When such noise occurs. The position of the motor reducer should be adjusted in time to avoid breakage of the input shaft of the reducer.
Solution: Adjust the position of the motor reducer in time to avoid the breakage of the input shaft of the reducer and affect the normal use of the belt conveyor.
Under normal circumstances, the noise of the reversing roller and the driving roller during operation is very small, and if the abnormal noise of the belt conveyor is generally caused by bearing damage.
Solution: It is recommended to replace the new bearing.
The above is an analysis of the noise generated during the operation of the belt conveyor. I hope it can help you. If you need more information, you can contact Xinxiang Dahan at any time. There are more professional staff to make you more specific and detailed guidance.
Address：China,Yanjin county forest park gate to the west 1000 meters north road.
Online Chat 
Email