4 tips to improve the efficiency of your ultrasonic sieving machine

As we all know, the ultrasonic sieving machine is a special type of equipment for treating ultra-fine powder. The material characteristics of the adhesive powder make it impossible to screen on the ordinary vibrating screen, although the uniqueness of the ultrasonic wave is solved to some extent. The problem of sieving is not possible, but the screening efficiency in some material screening is still very low. In order to solve these problems as much as possible, Dahan Machinery specifically summarized the following methods:

4 operations that improve the efficiency of the ultrasonic sieving machine

1. Increase the efficiency of vibrating screening by increasing the physical screening area

Increasing the physical screening area, that is, increasing the screen width or diameter of the ultrasonic sieving machine. As we all know, the screening accuracy of the vibrating screen is related to the length of the screen surface, and the screening efficiency is related to the width of the screen surface. This is not only suitable for linear screens, but also for ultrasonic sieving machines (or circular vibrating screens). Then we should consider the maximum output of our machine when ordering the sieve machine so that the manufacturer can give the right model;

2. Reduce the accumulation of material on the screen surface

Simply put, it is necessary to design a reasonable amount of material to be fed. We can understand the maximum bearing capacity and suitable dosage of the screen machine according to the instructions of the screen machine. Only by properly controlling the amount of material to be fed, the material can be evenly distributed on the screen surface to improve the screening. effectiveness. If there is too much one-time feeding, too much material accumulated on the ultrasonic sieving machine surface will not only affect the screening accuracy and screening efficiency, but also have a great influence on the wear and impact of the screen. Material size and characteristics are also key to the efficiency of screening.

3. Increase the exciting force of the ultrasonic sieving machine

This is mainly achieved by the vibration motor equipped with the ultrasonic sieving machine, which is the best way to increase the screening efficiency. Different from the linear screen motor, the angle between the screen frame and the screen frame can be adjusted freely. The circular vibrating screen (ultrasonic sieving machine) motor uses a vertical vibration motor whose angle is not adjustable. Then we can adjust the motor weight to increase its The strength of the exciting force, thus increasing the screening efficiency (the adjustment of the exciting force strength should be within the range of the motor itself, if you need to adjust, you can consult Dahan Machinery).

4. Increase the cleaning device to improve the efficiency of ultrasonic sieving machine

No matter what kind of material, there will always be a phenomenon of blocking the net during the screening process. For ultrasonic sieving machines, the use of bouncing ball assist in screening ultrafine materials can have unexpected effects.

In general, the screening efficiency of the ultrasonic sieving machine can be greatly improved by some minor adjustments. Of course, the magnitude and effect of the efficiency increase are also different depending on the materials. At the same time, it should be noted that these operations are based on the professional technical knowledge and operating experience of the ultrasonic sieving machine. Otherwise, it is recommended that you do not disassemble the vibrating screen at will. 

For details, please consult us for professional suggest.